Conferences - Engineering and Design ITS
Browse by
Recent Submissions
-
Prediction of Hotspots in Injection moulding by Using Simulation, In-mould Sensors, and Machine Learning /
(IEEE, 2023-07-03)Injection moulding is an industrial process for the mass production of plastic components, with many parameters affecting the quality of this process. Hotspot regions in the component occur due to non-optimised process ... -
CFD Prediction of Turbulent Convective Heat Transfer in Additive Manufactured Rough Channels /
(American Society Of Thermal And Fluids Engineering, 2022-05-15)Due to the physical phenomena involved in Powder Bed Fusion (PBF) processes, the surface of the manufactured product is naturally rough, significantly impacting the characteristics of fluid flow and heat transfer over ... -
Study of the drug release profile of novel polymer-drug matrix formulations prepared by hot melt extrusion /
(International Manufacturing Conference, 2021-09-07)Hot Melt Extrusion (HME) is an emerging technology in the pharmaceutical industry for manufacturing drug delivery devices. In the HME process, the polymer and drug are melted and mixed with the help of heat and mechanical ... -
Lead-free thick-film ultrasound sensors for industrial process monitoring /
(SEIA, 2022-09-21)Sol-gel high-temperature ultrasound transducers (HTUT) have been developed to compensate for the limitations present in many commercial ultrasound sensors, such as limited temperature durability and limited frequency ... -
Machine vision for the quality assessment of emulsions in pharmaceutical processing /
(IEEE, 2018-10-21)Emulsion quality evaluation using machine vision techniques depends on the efficiency of the image segmentation algorithms. Two different machine vision techniques are investigated to determine their competency in ... -
Comparison of Intelligent Approaches for Cycle Time Prediction in Injection Moulding of a Medical Device Product /
(IEEE, 2021-11-15)Injection moulding is an increasingly automated industrial process, particularly when used for the production of high-value precision components such as polymeric medical devices. In such applications, achieving stringent ... -
The Application of Computational Chemistry and Chemometrics to Developing a Method for Online Monitoring of Polymer Degradation in the Manufacture of Bioresorbable Medical Implants /
(Springer-Verlag, 2014)Bioresorbable polymers such as PLA have an important role to play in the development of temporary implantable medical devices with significant benefits over traditional therapies. However, development of new devices is ... -
Analysis of a sustainable travel modal share study at the IT Sligo campus
(2015)Research was carried out at IT Sligo to determine travel modes, and views and preferences of commuter stakeholders on sustainable transport provision. Findings were planned to provide inputs into development of a workplace ... -
Addressing engineering teaching issues in online distance learning
(2011)Efforts by IT Sligo to transfer courses into an online distance learning format since 2002 ran into three significant obstacles, namely the expense of developing learning materials for niche areas, an inability to teach ... -
Opening education through competency based assessment
(2013)Although Open Educational Resources and Practices, and other innovations contain huge potential to transform lifelong learning, there are unnecessary regulatory barriers, and Competency Based Assessment may be the key ... -
Back to the future: the power of traditional teaching with modern communication
(2010)The use of information and communication technologies in the delivery of higher education is heavily influenced by academic researchers in the fields of e-learning and education. The primary interest of such academics is ...
RSS 1.0