Research, Innovation & Enterprise: Recent submissions
Now showing items 341-360 of 494
-
Dynamic collaboration of centralized & Edge processing for coordinated data management in an IoT paradigm.
(IEEE, 2018-05)Over the past decade, much focus in the area of Technology has deviated towards two relatively new areas; "The Internet of Things" and "Machine Learning". Although completely separate technologies, they have one major ... -
Addressing challenges and opportunities of the European seafood sector under a circular economy framework.
(Elsevier, 2020-02)The European seafood and aquaculture sectors are facing important challenges in terms of environmental threats (climate change, marine debris, resources depletion), social development (worker rights, consumer's awareness) ... -
An adaptive policy approach to video quality assurance.
(IEEE, 2018-12)Video in all its forms is probably the most important service carried on networks today and few would argue that video quality assurance is one of the most daunting network management challenges. Quite often, video ... -
A tutorial for olfaction-based multisensorial media application design and evaluation.
(ACM, 2017-09)Recently, multimedia researchers have added several so-called new media to the traditional multimedia components (e.g., olfaction, haptic, and gustation). Evaluating multimedia user-perceived Quality of Experience (QoE) ... -
Bidirectional LSTM autoencoder for sequence based anomaly detection in cyber security.
(United Kingdom Simulation Society, 2019)Cyber-security is concerned with protecting information, a vital asset in today’s world. The volume of data that is generated can be usefully analyzed when cyber-security systems are effectively implemented with the aid ... -
Application of immersive technologies for education: state of the art.
(IEEE, 2015-11)Existing multimedia systems used in education mostly address only two senses by using two communication channels (visual and audio) of the five human senses (sight, hearing, taste, smell, and touch), limiting the potential ... -
Synthesis of linear aliphatic polycarbonate macroglycols using dimethylcarbonate.
(Wiley, 2009-01-05)A series of linear aliphatic polycarbonate polyols were synthesized using dimethylcarbonate and a linear alkane diol or specific combinations of linear alkane diols. Polyol synthesis was carried out in a two‐stage process ... -
Evaluation and characterisation of urinary catheter coating utilising Hansen solubility parameters and FEA analysis.
(Elsevier, 2015-08-15)This work investigated the Hansen solubility parameters required to optimise a functional polyurethane base coat as an attachment for a lubricious polyvinyl pyrrolidone coating for polyvinyl chloride urinary catheters. ... -
Matrix and reservoir-type multipurpose vaginal rings for controlled release of dapivirine and levonorgestrel
(Elsevier, 2016-09-10)A matrix-type silicone elastomer vaginal ring providing 28-day continuous release of dapivirine (DPV) ⿿ a lead candidate human immunodeficiency virus type 1 (HIV-1) microbicide compound ⿿ has recently demonstrated moderate ... -
In vitro fibroblast and pre-osteoblastic cellular responses on laser surface modified Ti-6AI-4V.
(IOP Publishing, 2014-12-29)The success of any implant, dental or orthopaedic, is driven by the interaction of implant material with the surrounding tissue. In this context, the nature of the implant surface plays a direct role in determining the ... -
Tailoring surface properties from nanotubes and anodic layers of titanium for biomedical applications.
(Woodhead Publishing, 2019)The following chapter gives an overview of the anodic layers and nanotubes produced with plasma electrolytic oxidation. An introduction into the mechanisms involved in producing these nanofilms, such as the required ... -
Access control policy enforcement for zero-trust-networking.
(IEEE, 2018-06)The evolution of the enterprise computing landscape towards emerging trends such as fog/edge computing and the Industrial Internet of Things (IIoT) are leading to a change of approach to securing computer networks to deal ... -
Microbiological characterisation and impact of suspended solids on pathogen removal from wastewaters in dairy processing factories.
(CUP, 2018-08)In this Research Communication we investigate the microbiological profile of 12 dairy wastewater streams from three contrasting Irish dairy processing factories to determine whether faecal indicators/pathogens were present ... -
DairyWater: striving for sustainability within the dairy processing industry in the Republic of Ireland.
(CUP, 2018-08)This Review describes the objectives and methodology of the DairyWater project as it aims to aid the Irish dairy processing industry in achieving sustainability as it expands. With the abolition of European milk quotas in ... -
Terminal sterilization of medical devices using vaporized hydrogen peroxide: a review of current methods and emerging opportunities.
(Wiley, 2019-08)Medical devices are an important and growing aspect of healthcare provision and are increasing in complexity to meet established and emerging patient needs. Terminal sterilization plays a vital role in the provision of ... -
Synchronizing use of sophisticated wet-laboratory and in-field handheld technologies for real-time monitoring of key microalgae, bacteria and physicochemical parameters influencing efficacy of water quality in a freshwater aquaculture recirculation system: A case study from the Republic of Ireland.
(Elsevier, 2020-04-16)There has been growing interest in exploiting microalgae as a natural process for low cost wastewater treatment and for water quality control and remediation in aquaculture. This constitutes the first study to report on a ... -
Electrospinning of hydrogels for biomedical applications
(Springer Nature, 2018)The field of biomedical applications for hydrogels requires the development of nanostructures with specific controlled diameter and mechanical properties. Nanofibers are ideally candidates for these advanced requirements, ... -
Structure response for cellulose-based hydrogels via characterization techniques.
(Springer, 2019)Hydrogels are three-dimensional crosslinked polymeric networks capable of imbibing substantial amounts of water or biological fluids and are widely used in biomedical applications, especially in pharmaceutical industry as ... -
Effect of anodizing time on the mechanical properties of porous titania coatings formed by micro-arc oxidation.
(Elsevier, 2017-01-15)Porous TiO2 coatings were produced on commercially pure Ti substrates by micro-arc oxidation (MAO) in 1.0 M H2SO4 electrolyte for different anodizing times. Their mechanical properties were assessed by means of instrumented ... -
A federated learning system for optimised environmental control of consecutive areas.
(IADIS, 2019)Building management systems have led to artificially controlled environmental conditions. While new infrastructure will lead to a lower carbon footprint and a better working environment, the costs cannot justify the rewards ...
