Browsing Technological University of the Shannon: Midlands Midwest by Title
Now showing items 1-20 of 1388
-
3D printed end of arm tooling (EOAT) for robotic automation.
(MDPI, 2018-09)This research furthers the practice of designing and manufacturing End of Arm Tooling (EOAT) by utilizing a low cost additive manufacturing Fused Filament Fabrication (FFF) technique to enable tool weight saving and ... -
3D printed end of arm tooling (EOAT) of a robotic arm
(Athlone Institute of Technology, 2018-04-24)This research furthers the practice of designing and manufacturing an EOAT for low weight applications by utilising additive manufacturing (“3D Printing”) techniques to decrease energy consumption via tool weight savings ... -
3D printed polymers are less stable than injection moulded counterparts when exposed to terminal sterilization processes using novel vaporized hydrogen peroxide and electron beam processes.
(Elsevier, 2019-11-21)There is an increasing trend for use of 3D printing processes in healthcare due in part to emergence of customised medical devices and associated low manufacturing cost. However, there is a dearth of knowledge on the ... -
3D printing of photocurable resin reinforced by functionalised graphene nanoplatelets
(MDPI, 2023-05-05)The influence of functionalised graphene nanoplatelets with melamine on the thermal and mechanical properties of a 3D-printed photopolymerisable resin is investigated. In this work, a liquid-based 3D printer and stereolithography ... -
4S (Significant, Same, Specific, Simultaneous) Application Exercise –Alternatives to Multiple Choice
(Technological University of the Shannon Midlands Midwest, 2022)The 4S (significant, same, specific simultaneous) model helps to ensure that educators design TBL application exercises which will facilitate engaging whole-class discussions. The type of application exercise most ... -
A qualitative analysis of social care
(2016)The research commences through a literature review of the current literature available regarding aftercare in Ireland. The overall impression from the current literature identifies a huge gap in literature for a larger ... -
Aarhus Academy: Access to environmental justice myth buster.
(Environmental Justice Network: EJNI, 2023-01)This paper is one of a series of papers designed as a resource for NGOs and those working on EU legislative developments. It summarises the most common arguments made against including Aarhus Convention rights in EU laws ... -
Ability levels, implicit theories of intelligence, cognitive load, and fluid intelligence: an exploration into the correlation between spatial ability and STEM education.
(ResearchED, 2018-03-10)Decades of empirical evidence demonstrates the correlation between spatial ability and STEM education. However, a causal relationship is yet to be confirmed. This talk will present empirical data concerning this relationship ... -
Accelerated solvent based extraction and enrichment of selected plasticisers and 4-nonylphenol, and extraction of tin from organotin sources in sediments, sludges and leachate soils.
(Elsevier, 2009-02-23)Enrichment techniques have become an important feature in the trace analysis of oestrogen mimicking chemicals in the environment. Recent developments such as accelerated solvent extraction (ASE) have improved extraction ... -
Access control policy enforcement for zero-trust-networking.
(IEEE, 2018-06)The evolution of the enterprise computing landscape towards emerging trends such as fog/edge computing and the Industrial Internet of Things (IIoT) are leading to a change of approach to securing computer networks to deal ... -
Achieving sustainability of the seafood sector in the European Atlantic area by addressing eco-social challenges: the NEPTUNUS Project.
(2022-03-05): Fisheries and aquaculture are becoming a focus of societal concern driven by globalization and increasing environmental degradation, mainly caused by climate change and marine litter. In response to this problem, the ... -
Activity profiles and the associations with weight status in population studies of young children: are there gender differences?
(Human Kinetics, 2017-02)Purpose: Profiling activity behaviors in young children is important to understand changes in weight status over time. The purpose of this study is to identify activity profiles from self- and parental-reported Physical ... -
activPAL™ determined sedentary behaviour, physical activity and academic achievement in college students.
(Taylor & Francis, 2018-03)The aim of this study was to examine relationships between activPALTM-determined sedentary behavior (SB) and physical activity (PA) with academic achievement. A total of 120 undergraduates (N=57 female; 20.6 ± 2.3 years) ... -
Adaptive comparative judgement: a mechanism to enrich and enhance assessment practices to support teaching and learning.
(2017)One of the most fundamental and challenging aspects of pedagogical practices is assessment of student learning. Assessment mechanisms are adopted in response to a variety of agendas, such as providing a summative ‘grade’ ... -
Adaptive intent realisation (AIR) - inductive intent realisation through NLOP enabled intent matching
(Technological University of the Shannon: Midlands Midwest, 2023-09)There is a strong interest in designing systems that can simplify the interactions between humans and complex digital systems. Network Operators want more straightforward mechanisms to engage with their networks and ... -
Adaptive perceptual block compressive sensing for compression.
(Institute of Electronics, Information and Communication Engineers, 2016-06)Because the perceptual compressive sensing framework can achieve a much better performance than the legacy compressive sensing framework, it is very promising for the compressive sensing based image compression system. In ... -
An adaptive policy approach to video quality assurance.
(IEEE, 2018-12)Video in all its forms is probably the most important service carried on networks today and few would argue that video quality assurance is one of the most daunting network management challenges. Quite often, video ... -
Additive manufacturing of personalized pharmaceutical dosage forms via stereolithography.
(MDPI, 2019-12-03)The introduction of three-dimensional printing (3DP) has created exciting possibilities for the fabrication of dosage forms, paving the way for personalized medicine. In this study, oral dosage forms of two drug ... -
Additive manufacturing of PLA/HNT nanocomposites for biomedical applications
(Elsevier, 2019)Additive manufacturing has been of great interest of research in various applications due to their ease in processability, cost effectiveness and adaptability. In this study Poly Lactic Acid (PLA) was used as the base ... -
Addressing challenges and opportunities of the European seafood sector under a circular economy framework.
(Elsevier, 2020-02)The European seafood and aquaculture sectors are facing important challenges in terms of environmental threats (climate change, marine debris, resources depletion), social development (worker rights, consumer's awareness) ...
